16Mo3 Flanges

16Mo3 Industrial Flanges, Alloy Steel 16Mo3 Flanges, 16Mo3 Slip On (SORF) Flanges, UNS K11562 Orifice Flanges, CrMo 16Mo3 Ring Type Joint Flanges Suppliers in Mumbai, India.

Cr-Mo 16Mo3 Bilnd (BLRF)Flanges, DIN 1.5415 Flanges, Chromium-Molybdenum 16Mo3 Reducing Flanges, 16Mo3 EN 10216-2 Steel SWRF Flange Exporter In India

Manufacturer of 16Mo3 Chromium Molybdenum Steel Tongue & Groove Flanges Stockist, 16Mo3 Steel Flanges, Chrome Moly 16Mo3 Socket Weld Flanges, ASME B16.5 16Mo3 Steel WNRF Flange Distributor, 16Mo3 Weld Neck (WNRF) CrMo Steel Flanges.

Rajendra Industrial Corporation is one among the prominent manufacturer, supplier and exporter of 16Mo3 Flanges as per national and international quality standards. 16mo3 Flanges are chrome molybdenum steel alloy for use in elevated working temperatures. 16Mo3 Flanges are typically used in a wide range of power plant equipment, industrial exhaust, venting and flare systems, waste recycling and incineration plants, boilers, superheater tubes, collector and hot steam pipes, stove tubes and conduits.

16Mo3 Flanges are also valuable for machinery where parts are likely to remain hot for an extended period. Our ASTM 204 16Mo3 Flanges is more resistant to the huge thermal stresses. Our 16Mo3 Flanges are manufactured using high-quality raw materials which are tested under quality experts and professionals. We manufacture these 16Mo3 Flanges in various forms and sizes and also customize them according to the demands of our customers at affordable prices. We also provide third-party inspection certificates along with our flanges.

Chrome Moly 16Mo3 Flanges Specifications

Dimensions : ANSI B16.5, ANSI B16.47 Series A & B, MSS-SP-44
Standards : ASTM, ASME Flanges, ANSI Flanges, DIN Flanges, EN Flanges, BS Flanges etc.
Size: ½” NB – 48″ NB
Class : 150#, 300#, 600#, 900#, 1500#, 2500#, etc
Grade : 16mo3, (DIN 1.5415, UNS K11562)

Flanges are designed to the following pressure ratings : 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.
The most common facings machined on flanges are:
(a) Raised face, 1/16 inch for 150lb and 300lb, ¼ inch for 400lb and heavier.
(b) Flat face, for 150lb and 300lb only, other may be flat face on request.
(c) Ring type joint, may be applied to all pressure ratings.

 

CrMo 16Mo3 Flanges Equivalent Grades

DIN,WNr
BS
UNI
ISO
16Mo3
240
16Mo3
P26
243
TS26

EN 10216-2 16Mo3 Flanges Chemical Composition

16MO3 C Mn S N Cu Si P Cr Ni Mo
0.12- 0.2 0.40- 0.90 0.01 0.012 0.30 0.35 0.025 0.30 0.30 0.25- 0.35

16Mo3 Steel Flanges Mechanical Properties

16Mo3 Tensile Strength
(Mpa)
Yield Strength
(Mpa)
Elongation in
100-150 mm(%)
Elongation in
16 mm(%)
Max Thickness
(mm)
440-590 220-275 19 24 250